Abby Home Improvement

Glass Door Repairs For Sliding Glass Doors

 If the sliding glass doors in your home are more than 10 years old, you might notice that they are becoming harder to slide open. This problem is even more common on aluminum frame dual pane doors. The reason is because the doors are heavier due to the dual pane glass, but many of the aluminum units did not use stainless steel rollers. So, in many cases, the rollers get rusty from moisture and they start to bind.

In order to replace the rollers, you have to remove the sliding panel from the opening. In most instances, the fixed panel must be removed in order for the sliding panel to come out. There is a simple way to determine whether or not your fixed panel has to come out as well. If the slider is on the inside track and the fixed panel is on the outside track, you have to remove both panels, because the slider will only come out from the outside. There is a lip on the bottom of the track inside your house. That lip keeps water from coming in. Unfortunately, that lip is also too high to lift the sliding panel up and over. So, you have to remove the fixed panel first, then lift and swing out the slider from outside. If you are one of the few people who have a slider on the outside track, then you can lift your slider out without removing the fixed panel.

But, let’s assume you need to remove the fixed panel first. Here is what you do: Remove your screen door if you have one. The screen door will have two rollers on the bottom. Lift one end of the door frame with one hand while using a flat screwdriver to lift the roller off the track. Do that on both sides, then take out the screen door and set it aside. Now, look for a metal piece on the bottom track that runs from the bottom corner of the fixed panel all the way across to the bottom of the side jamb that has the door lock hardware. If your door is really old that piece might be missing. If you have one, you can pry it up from the track. It is snapped in place even though it looks like it is a part of the track. Once you have that piece removed, you want to look inside the house where the fixed panel is against the wall jam. Look for screws holding the frame to the jam. They usually have one near the top and bottom corners, and one near the center. Remove these screws and put them where you won’t lose them. Now, you should be able to pull the fixed panel out of the side jam. There is a very good chance that it will be stuck. If it is, grab the center rail near the bottom and lift up as hard as you can. If you feel the panel go up, pull it back down. Do this a couple of times, then try to pull it out of the side jam again. This usually loosens it enough to pull it out. If it still won’t come out, you will have to put a thin screwdriver between the fixed panel frame and the side jam and pry while a helper pulls the panel away from the jam. Once you get it free of the side jam, grab the fixed panel side rail and have a helper grab the other rail. Lift the panel up into the top track and swing the bottom out of the bottom track. Remove the panel from the top track and set it aside with the screen door.

Now, you can try lifting the slider up and out, just like you did with the fixed panel. If the slider won’t clear the bottom track, you need to do a couple of things. First, look to see if it’s the old rollers protruding from the bottom that is preventing the door from coming out, or if the actual bottom of the door frame is hitting the track. In almost all cases, it will be the old rollers. But, if the opening is 8′ wide, sometimes the wood header that runs across the opening has sagged just enough to make it tight in the center of the opening. If it’s the rollers, you need to adjust them all the way up into the door. Look for a hole on the bottom side where you can put a phillips screwdriver and find the adjustment screw. Then turn that screw counterclockwise as far as you can. Do that to both sides, then try lifting out the door. If you are still getting stuck, have your helper lift one side and pull outward while you try to pry the frame and roller over the track. If you get one side out, have your helper hold that side with his or her foot to prevent it from going back in while he or she lifts the other side for you to pry free.

Once you get the slider out, almost all rollers are held in place by the same screw that holds the frame corners together. So, you need to set the panel on one side, remove the screw in the corner, flip the panel over, remove the screw on the other bottom corner. Now, you can take a rubber mallet or the wood handle of a hammer, and tap the bottom frame off the glass. This will give you access to your rollers. Take a close look at how they are inserted into the door frame. In fact, it’s a good idea to only remove one roller to bring with you to match for the new ones. Then, when you get back home, you can use the roller that is still in place as a guide to installing the new ones.

Places like Home Depot, Lowes, and Ace Hardware carry about 80-90% of the rollers out there. So, you should be able to find them. However, let’s say this just isn’t your lucky day, and you can’t find your rollers anywhere. You are going to have to have them ordered. Bring the roller to your local glass shop. If you’re lucky, they will have them in stock. If not, they can order the rollers, but you won’t get them for about a week. Don’t panic. Just go home and tap the bottom frame back on the door panel, but leave the corner screws out. You can even leave the roller out that you removed. Lift the door back in place, install the fixed panel but don’t snap the bottom piece back in, and don’t install the inside screws. Then, from inside the house, lift the slider and pull it closed. You don’t want to drag it if you left the roller out. It will scrape the bottom track. Just lift it enough to take the pressure off, and close and lock it.

When Your new rollers come in, take everything back out and install the new rollers. Adjust the new rollers all the way up before putting the door back in. That way, the new rollers won’t interfere with you lifting it back in place. Adjust the new rollers down until the door slides good and locks. You want to be sure there is an equal gap at the top and bottom when the door is about an inch from closing into the side jam. You can adjust the rollers to make this dimension even. If you can get the job done by a professional for $50 or $60 including parts, it might be worth hiring someone to do it. But, in high population areas such as Los Angeles, it’s common to pay $100 in labor only. Then they mark up the cost of the rollers, and you could wind up spending $130 for a job that you can do yourself for about $20.

Aluminium Window Girlls

A great way to add security to some home is having a window security grill. Security grills shouldn’t be wrongly identified as window security bars. Yes, security bars are effective, but they can be an ugly eyesore, as most people feel that they provide a house the look of a prison. However, a window security grill (also called a window security screen) can add effective security whilst not taking away the appeal of the home.

They are made from a steel mesh that can ‘t be pushed or pulled out of the frame and they are also resistant against cutting. Much like a burglar steel door, the steel mesh in it is permanently mounted in a heavy duty steel frame. The frame is welded on all four corners and installs over a window using tamper resistant bolts or screws. One side of the grill will be hinged so that it could be opened from inside of the house. Building codes or fire codes in most cities through the U . s require that no windows be permanently blocked. Because they are designed to keep intruders out, there is a quick release mechanism located on the inside of the security grill that will allow the grill to hinge open in the event of an urgent situation. This allows occupants to quickly evacuate the house through the window.

Since the fundamentals of a window security grill are understood, let’s cover the window security grills in a a bit more depth. With several manufacturers offering window grills, the choices will be different from the different manufacturers. Window security grills are available from a basic design to more elaborate designs. The fundamental types of security window grill will have a steel wire mesh with either a steel or aluminum frame. Typically, the basic grills are just obtainable in a natural steel finish or white. Some homeowners will choose to install the basic style of the safety window grill over windows which are obscured from view. This gives a more economical way to secure a home. The more elaborate designs of a security grill are generally used in the leading of the house or any visible window. The material along with the workmanship of the window grills is what makes them more elaborate. These security grills make use of a heavy duty steel mesh that is tamper resistant and cant not be cut. The steel mesh will come in several different designs and styles. Aside from the steel mesh, the frames are much more desirable too. The frames are smooth and also have a stylish finish. A house owner can custom order a security window grill inside a color that suits the house.

Installing them over vulnerable windows will deter any could be intruder. One consider the window security grills and also the intruder will quickly proceed to a simpler target. These grills are a great way to safeguard your valuables and more importantly, they’ll protect your loved ones.

Cheap Bathroom Rugs

Rugs at home make a total difference, it can add up to the beauty of your own houses without actually spending abundantly. Most of the time we are putting on big amount just to give our houses the kind of look we think it deserves, with this we are drawn away to the fact that we can actually refresh our houses without spending too much. This is where cheap rugs would be of great help; putting on rugs on several part of your dream den would definitely bring out the look you’ve always wanted. And our bathroom is not an exemption; after all we spend most of our days on this area. Thus it needs to be pampered and be given the best look a bathroom could ever have without going beyond your budget.

Some people might actually linger on the possible reasons of putting rugs on the bathroom, for some having rugs on their bathrooms would not be necessary. But there are several reasons for you to ponder for a second and try to dig deeper as each of the reasons reveal; you might take the chance of having bathroom rugs anyways. After a long day at work or after a very stressful encounter, we would want to stay on our room and find time to relax but then some stressors are still available on this part of the house at times and so we are left of no choice but just to live with it. However, there is another part of the house where we can actually relax and find time to be alone. It may not be on the top of our minds but it is indeed a great place to find peace; I’m actually talking about our bathrooms.

Try visualizing a tub filled with bubbles and rose petals, isn’t that inviting? True enough you can set your minds into cooling stage as you would see this scene. It would be great especially if you would have wonderful decorations to fill it such as candles, rose petals and rugs for the floor accent. All this decorations indeed play a very vital role in bringing out the coolest place ever. On this note, you can use rugs to brighten up the color of your bare bathrooms. There are colorful rugs available almost everywhere and it comes in different designs where you get to choose the perfect rug that suits your taste.

Furthermore, bathroom rugs are not only placed for aesthetic means but more importantly it is placed for safety. After, cooling yourself in the tub you need to get out of it and it would be best if you will not be stepping on cold tiled flooring which can be slippery at times. You would rather want to step on warm, cozy flooring courtesy of your bathroom rugs and it assures you of a safety landing. But before you get on those rugs, you need to plan on the theme you want so as not to mismatch designs and colors which will no longer look appealing.

More importantly, you need to keep your bathroom rugs clean so to avoid making it a good habitat for bacteria since it will have drops of water most of the time and moisture aids in the fast multiplication of bacteria. So to avoid such you have to keep those rugs clean regularly.

Choosing the Your Furniture at the Furniture Store

When you are shopping for furniture, you can save a lot of time, and sometimes money, if you know which stores are the best for the items you are seeking. Many all-purpose stores carry at least some of each type of furniture, but most do not have a large selection of anything but conventional furniture. These are still good stores at which to shop, if only because you can get everything in one stop. However, if you have your heart set on a particular look, style or type of item, it’s a good idea to look a little further.

Traditional

Traditional, or conventional, furniture stores often stock the latest styles in bedroom sets, living room furnishings, and dining sets. Some may also specialize in one type of item, say couches and chairs of every type, or mattresses and bedroom sets, but these are usually still in the traditional styles that you can pick up at many stores. These stores are great if you wish a general, classic look to your furnishings, and a wide selection to choose from.

Speciality

Speciality furniture stores include those that bring in various furnishings and accessories from different countries. Perhaps you don’t want your entire home to have an exotic look, but would love to have a footstool or kitchen dining set that was made in a foreign country. If that is the case, these specialty furniture stores usually carry unique, or at least unusual, items with which you can accent your home. Many of these items can only be reliably found in furniture stores that deal in imports, though when you shop online sometimes you can even buy them direct from where they are made.

Office

Furniture stores that specialize in office furniture have become more popular over the years. Not only do traditional offices sometimes need to update their furnishings, or outfit an office from the ground up, but more and more people are furnishing home offices. Typing at the kitchen table can get the job done, but doing your work at a desk while sitting in a comfortable chair causes less strain on your body. If you are thinking of furnishing a home office or a traditional office, an office furniture store is your best bet for a good selection.

Infants and Children

Buying furniture for infants and children can be a pleasant experience, particularly if you visit stores that cater to them. You can usually find children’s furnishings at department stores and traditional furniture stores, but the selection is not as wide, and you may need items that they don’t carry. When you browse the aisles of an offline or online store that caters to children, however, you realize how simple it is to just choose the items you need. Good children’s furniture stores will often carry items that you may need for children from infancy to the teen years.

Buying furniture is an investment and it only makes that you make the most of both your money and time. You can do this by seeking out the stores that will fulfill your needs in the best, most efficient manner.

Scroll To Top